How to Use Bissell Little Green?

The Short Answer is:

To use the Bissell Little Green portable carpet cleaner, start by filling the clean water tank with hot tap water and the cleaning solution according to the instructions on the bottle. Then, attach the cleaning tool to the hose and plug in the machine. Turn on the machine and press the trigger to spray the cleaning solution onto the carpet. Use the cleaning tool to scrub the area, working in a back-and-forth motion. Release the trigger and use the suction to remove the dirty water and cleaning solution from the carpet. Repeat these steps until the spot is clean. Finally, to remove excess moisture, use drying strokes by simply not pressing the spray trigger and running the cleaning tool over the area. Always refer to the user guide for specific instructions on how to use your Bissell Little Green model.

Keeping carpets and upholstery clean can be a daunting task, especially when dealing with tough stains and spots. Fortunately, the Bissell Little Green is a portable carpet and upholstery cleaner that can help make the job easier.

This versatile machine can be used to clean carpets, upholstery, car interiors, and more. It is equipped with powerful spray and suction, making it easy to remove everyday messes and pet stains.

In this article, we will provide a step-by-step guide on how to use Bissell Little Green to effectively clean your carpets and upholstery.

Preparing Your Bissell Little Green for Cleaning

Here are the steps to prepare your Bissell Little Green for cleaning:

1. Fill the clean water tank with hot tap water and the cleaning solution according to the instructions on the bottle.
2. Make sure the dirty water tank is empty and properly attached to the machine.
3. Plug in the machine and turn it on.
4. Wait for the machine to heat up, which should take about a minute.
5. Test the machine on an inconspicuous area of the carpet to ensure that the cleaning solution does not damage the carpet.
6. Adjust the cleaning tool to the desired height for the carpet pile.
7. You are now ready to start cleaning the carpet using the Bissell Little Green machine.

Understanding the Machine Components and Functions

Understanding the machine components and functions of the Bissell Little Green portable carpet cleaner is essential to use it effectively. Here are the main components and functions of the machine:

1. Clean Water Tank: This is where you fill the machine with hot tap water and cleaning solution.
2. Dirty Water Tank: This is where the dirty water and cleaning solution are collected during the cleaning process.
3. Hose: The hose connects the cleaning tool to the machine and allows you to spray the cleaning solution onto the carpet.
4. Cleaning Tool: The cleaning tool is attached to the hose and is used to scrub the carpet and remove the dirty water and cleaning solution.
5. Trigger: The trigger on the cleaning tool controls the spray of the cleaning solution onto the carpet.
6. Suction: The suction on the cleaning tool removes the dirty water and cleaning solution from the carpet.
7. Height Adjustment: The cleaning tool can be adjusted to the desired height for the carpet pile.
8. Power Switch: The power switch turns the machine on and off.

Step-by-Step Guide to Using the Bissell Little Green

Here is a step-by-step guide to using the Bissell Little Green portable carpet cleaner:

1. Prepare the machine for cleaning by filling the clean water tank with hot tap water and the cleaning solution according to the instructions on the bottle.
2. Make sure the dirty water tank is empty and properly attached to the machine.
3. Plug in the machine and turn it on.
4. Wait for the machine to heat up, which should take about a minute.
5. Test the machine on an inconspicuous area of the carpet to ensure that the cleaning solution does not damage the carpet.
6. Adjust the cleaning tool to the desired height for the carpet pile.
7. Attach the cleaning tool to the hose and plug it into the machine.
8. Turn on the machine and press the trigger to spray the cleaning solution onto the carpet.
9. Use the cleaning tool to scrub the area, working in a back-and-forth motion.
10. Release the trigger and use the suction to remove the dirty water and cleaning solution from the carpet.
11. Repeat steps 8-10 until the spot is clean.
12. To remove excess moisture, use drying strokes by simply not pressing the spray trigger and running the cleaning tool over the area.
13. Once you have finished cleaning, turn off the machine and unplug it from the power source.
14. Empty the dirty water tank and rinse it out with clean water.
15. Rinse the cleaning tool with clean water and let it dry.
16. Store the machine and its components in a safe and dry place.

Tips for Effective Spot and Stain Removal

Here are some tips for effective spot and stain removal using the Bissell Little Green:

1. Act quickly: The longer a stain sits, the harder it will be to remove. As soon as you notice a stain, try to clean it up right away.
2. Blot, don’t rub: When cleaning a stain, use a clean cloth or paper towel to blot the area gently. Rubbing can push the stain deeper into the fibers of the carpet or upholstery.
3. Use the right cleaning solution: The Bissell Little Green comes with a trial-sized bottle of cleaning solution, but you may need to purchase more depending on how often you use the machine. Make sure to use a cleaning solution that is appropriate for the type of stain you are trying to remove.
4. Follow the instructions: The Bissell Little Green comes with instructions for use. Make sure to read and follow them carefully to ensure the best results.
5. Use light strokes: When using the machine to clean a stain, use light strokes from the edges of the stain to the center. Don’t rub the stain. When you get to the center, lightly pinch in an upward motion.
6. Repeat as necessary: If the stain is particularly stubborn, you may need to repeat the cleaning process several times to fully remove it. Keep repeating until nothing else is lifted.
7. Cover the area: For tough pet stains, apply Bissell Pet Stain & Odor Remover to the stain area and cover the area with a damp towel for at least 24 hours. Finally, rinse the treated area with water.

Remember, the Bissell Little Green is meant for spot cleaning relatively small areas, not for cleaning large areas or commercial spaces. If you follow these tips, you should be able to effectively remove most stains using the Bissell Little Green.

Cleaning and Maintaining Your Bissell Little Green

Cleaning and maintaining your Bissell Little Green after use is crucial to ensure its longevity and optimal performance. To clean the machine, turn it off and unplug it from the power source. Empty and rinse the dirty water tank with clean tap water.

If necessary, use a soft-bristled scrub brush to scrub the inside of the tank and remove any stubborn residue. Rinse the tank thoroughly to ensure all cleaning solutions and dirt are removed.

Clean the cleaning tool by rinsing it with clean water and removing any debris or dirt. If the hose or nozzle is clogged, use a small brush or toothpick to remove any blockages.

Wipe down the exterior of the machine with a damp cloth to remove any dirt or spills. Allow all the components to air dry completely before storing them in a clean and dry place. For more detailed instructions, refer to the user guide or online resources provided by Bissell.

Troubleshooting Common Issues

If you encounter any issues with your Bissell Little Green portable carpet cleaner, there are some common troubleshooting steps you can take. If the machine is not spraying or has reduced spray, the spray nozzle may be clogged.

To fix this, clean the spray nozzle using an unfolded paper clip. Another reason for reduced spray or no spray could be an empty clean water/solution tank, so make sure to fill it up according to the instructions.

If you are experiencing no suction, check that the dirty water tank is properly attached and not full. You can also check for any blockages in the hose or nozzle and remove them using a small brush or toothpick.

If you encounter any other issues, refer to the user guide or online resources provided by Bissell for more detailed troubleshooting instructions.

Enhancing Cleaning Results with Bissell Little Green Accessories

The Bissell Little Green portable carpet cleaner comes with a variety of accessories that can enhance your cleaning results. Here are some of the accessories you can use:

1. Tough Stain Tool: This tool is designed to remove tough stains and spots from carpets, upholstery, and other surfaces.
2. Crevice Tool: This tool is designed to clean tight spaces and hard-to-reach areas, such as between cushions and car seats.
3. TurboBrush Tool: This tool is designed to clean stairs, upholstery, and other surfaces with a rotating brush that agitates the carpet fibers.
4. Extension Hose: This accessory allows you to extend the reach of the cleaning tool and clean high or hard-to-reach areas.
5. Cleaning Formula: Bissell offers a variety of cleaning formulas that are specially designed to work with the Little Green machine and can help remove tough stains and odors.

Using these accessories can help you achieve better cleaning results and make the cleaning process more efficient.

Conclusion on How to Use Bissell Little Green

In conclusion, the Bissell Little Green portable carpet cleaner is a versatile and effective tool for cleaning carpets, upholstery, and other surfaces. By following the steps outlined in this article, you can use the machine to effectively remove stains and dirt from your carpets.

Additionally, by using the accessories that come with the machine, you can enhance your cleaning results and make the process more efficient. It is important to clean and maintain your Bissell Little Green after use to ensure its longevity and optimal performance.

If you encounter any issues with the machine, refer to the user guide or online resources provided by Bissell for troubleshooting instructions. With proper use and maintenance, the Bissell Little Green can be a valuable tool for keeping your carpets and upholstery clean and fresh.